{
"item_title" : "Design, Build, and Program Your Own Quadcopter",
"item_author" : [" Eric Hunts "],
"item_description" : "Want to build your own drone instead of buying one ready to fly? Learn how to turn individual components into a working quadcopter, configure its flight controller, write software to communicate with it, and take your first controlled flight. Go beyond simply assembling a drone. This hands-on guide shows you how to select compatible hardware, calculate performance, build and wire the aircraft, install flight-control software, troubleshoot problems, and develop your own programmable drone projects. You will gain practical skills to build, repair, modify, and improve your quadcopter with greater confidence. Modern drones combine mechanical components, electronics, embedded software, radio communication, and flight-control systems. This book introduces the technologies through practical projects using Betaflight, ArduPilot, ExpressLRS, GPS, telemetry, Python, MAVLink, and Raspberry Pi. You will see how these tools work together to support manual flight, GPS-assisted operations, and autonomous missions. Follow two complete quadcopter projects from planning to flight. First, build the Starter Quad, a 5-inch freestyle-style drone using Betaflight and ExpressLRS. Then progress to the Autonomous Quad, an ArduPilot-based aircraft equipped with GPS, a compass, telemetry, and a Raspberry Pi companion computer. Along the way, learn to calculate thrust-to-weight ratios, estimate payload capacity and flight time, choose motors and electronic speed controllers, select batteries and propellers, and verify component compatibility before purchasing. Move from hardware construction to software configuration and programming. Work through frame assembly, soldering, electrical testing, firmware installation, radio setup, sensor calibration, failsafe configuration, and flight controller tuning. Then use Python and MAVLink to read telemetry, send commands, log flight data, plan GPS waypoint missions, and integrate additional sensors. Practical checks and simulator-based testing help you verify your work before attempting real-world flights. What's Inside This Book?Plan and design your drone: Choose a suitable quadcopter type, frame, components, and realistic budget.Calculate performance: Work out thrust requirements, payload capacity, motor specifications, battery capacity, and estimated flight time.Build the hardware: Assemble the frame, install motors and ESCs, solder connections, and test the power system.Configure flight controllers: Install and set up Betaflight and ArduPilot, configure radio controls, and calibrate sensors.Improve flight performance: Tune flight settings, inspect flight logs, diagnose instability, and troubleshoot common problems.Program your drone: Use Python, MAVLink, and Raspberry Pi to monitor telemetry and send commands.Develop autonomous capabilities: Configure GPS waypoint missions, automated takeoff, return-to-launch procedures, and experimental sensor integration. This guide is ideal for aspiring drone builders, FPV and quadcopter hobbyists, engineering students, electronics makers, Raspberry Pi enthusiasts, and developers interested in drone programming and autonomous flight. No previous drone-building experience is required. Basic arithmetic, an interest in electronics, and a willingness to learn soldering will help you get started. Start Building, Programming, and Flying Your Own Drone. Stop wondering how a quadcopter works and start building one yourself. Get your copy of *Build and Program Your Own Drone* and take the first step toward creating, controlling, and programming your own aircraft.",
"item_img_path" : "https://covers1.booksamillion.com/covers/bam/9/79/814/035/9798140351236_b.jpg",
"price_data" : {
"retail_price" : "25.99", "online_price" : "25.99", "our_price" : "25.99", "club_price" : "25.99", "savings_pct" : "0", "savings_amt" : "0.00", "club_savings_pct" : "0", "club_savings_amt" : "0.00", "discount_pct" : "10", "store_price" : ""
}
}
Design, Build, and Program Your Own Quadcopter : A Hands-On Guide to Drone Design, Assembly, Flight Controllers, and First Flight
by Eric Hunts
Overview
Want to build your own drone instead of buying one ready to fly? Learn how to turn individual components into a working quadcopter, configure its flight controller, write software to communicate with it, and take your first controlled flight.
Go beyond simply assembling a drone. This hands-on guide shows you how to select compatible hardware, calculate performance, build and wire the aircraft, install flight-control software, troubleshoot problems, and develop your own programmable drone projects. You will gain practical skills to build, repair, modify, and improve your quadcopter with greater confidence. Modern drones combine mechanical components, electronics, embedded software, radio communication, and flight-control systems. This book introduces the technologies through practical projects using Betaflight, ArduPilot, ExpressLRS, GPS, telemetry, Python, MAVLink, and Raspberry Pi. You will see how these tools work together to support manual flight, GPS-assisted operations, and autonomous missions. Follow two complete quadcopter projects from planning to flight. First, build the Starter Quad, a 5-inch freestyle-style drone using Betaflight and ExpressLRS. Then progress to the Autonomous Quad, an ArduPilot-based aircraft equipped with GPS, a compass, telemetry, and a Raspberry Pi companion computer. Along the way, learn to calculate thrust-to-weight ratios, estimate payload capacity and flight time, choose motors and electronic speed controllers, select batteries and propellers, and verify component compatibility before purchasing. Move from hardware construction to software configuration and programming. Work through frame assembly, soldering, electrical testing, firmware installation, radio setup, sensor calibration, failsafe configuration, and flight controller tuning. Then use Python and MAVLink to read telemetry, send commands, log flight data, plan GPS waypoint missions, and integrate additional sensors. Practical checks and simulator-based testing help you verify your work before attempting real-world flights. What's Inside This Book?- Plan and design your drone: Choose a suitable quadcopter type, frame, components, and realistic budget.
- Calculate performance: Work out thrust requirements, payload capacity, motor specifications, battery capacity, and estimated flight time.
- Build the hardware: Assemble the frame, install motors and ESCs, solder connections, and test the power system.
- Configure flight controllers: Install and set up Betaflight and ArduPilot, configure radio controls, and calibrate sensors.
- Improve flight performance: Tune flight settings, inspect flight logs, diagnose instability, and troubleshoot common problems.
- Program your drone: Use Python, MAVLink, and Raspberry Pi to monitor telemetry and send commands.
- Develop autonomous capabilities: Configure GPS waypoint missions, automated takeoff, return-to-launch procedures, and experimental sensor integration.
This item is Non-Returnable
Customers Also Bought
Details
- ISBN-13: 9798140351236
- ISBN-10: 9798140351236
- Publisher: Independently Published
- Publish Date: November 2026
- Dimensions: 10 x 7 x 0.46 inches
- Shipping Weight: 0.85 pounds
- Page Count: 218
Related Categories
